|
READ ME FIRST! |
|
Installation Instructions |
|
|
|
|
|
|
|
|
LED3-501CC, CS |
|
97-03 FORD PU / F150 / F250 LD |
|
|
|
|
|
L.E.D. THIRD BRAKE
LIGHT |
|
|
|
|
|
WITH CARGO LIGHT |
|
|
|
|
|
|
|
|
|
Your new Crystal Eyes L.E.D. 3rd
Brake Light is a quality-made product that will work beautifully on you
vehicle. |
|
Please refer to the
pictures below for installation. |
|
|
|
|
|
|
|
|
|
| 1. |
|
2. |
|
3. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unscrew the stock third brake
light. |
|
There is a rubber plug in the
stock light opening, unplug it. |
|
Pull the plug out a few inches
to expose the connector hole. |
|
|
|
|
|
|
|
| 4. |
|
5. |
|
6. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cut wires away from vehicle and
outside. Then, slide the rubber plug off the wire harness and discard. |
|
Take out the new Crystal Eyes
L.E.D. 3rd brake light and peel off black plastic covering a few inches. Cut black plastic covering off. |
|
Put red clips provided on all
three of the colored wires by clamping over each of the wires with pliers. |
|
|
|
|
|
|
|
| 7. |
|
8. |
|
9. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Then attach your new light to
stock wires by clamping the other side of the clip, black wire to black wire. |
|
Clamp orange wire to green wire,
and white wire to black/blue striped wire. |
|
Gently tuck all wires and clips
and wire into the opening. |
|
|
|
|
|
|
|
| 10. |
|
11. |
|
12. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Close
the hole with plug provided with the new light. |
|
|
Screw on the new light. |
|
Done! Thank you for your purchase. We hope you enjoy your new Crystal Eyes 3rd
Brake Light. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
