READ ME FIRST!			Installation Instructions
LED3-2040C / CS			LED THIRD BRAKE LIGHT
(If your vehicle is 05-Up, see reverse side for instructions.)			95-04 TACOMA
1.		2.		3.
	Unscrew and remove stock lens.		Pry open the plastic covering screw holes on both sides.		Remove stock light.
4.		5.		6.
	Take out stock screws.		Unplug connector from stock light.		Take out Crystal Eyes light and find a square connector.
7.		8.		9.
	Clip on metal clips provided on both screw holes.		Plug in the Crystal Eyes square connector to stock connector.		Tuck in all wires to opening and screw on new light with screws provided with your new light.
10.
	Thank you for your support on IPCW products.
	Now enjoy your new Crystal Eyes 3rd Brake Light.
READ ME FIRST!			Installation Instructions
LED3-2040C / CS			L.E.D. THIRD BRAKE LIGHT
(If your vehicle is 95-04, see reverse side for instructions.)			05-UP TACOMA
1.		2.		3.
	Unscrew the stock brake light.  Keep the screws for use in Step 6.		Remove stock light.		Unplug all connectors and remove bulbs.  You MUST REMOVE them, or they will burn out your new LED light.
4.		5.		6.
	Take out the new Crystal Eyes light from box.		The light has a square connector.		Plug in the Crystal Eyes square connector to stock connector and screw in the new light with original screws you kept.
7.
	Thank you for your support on IPCW products.
	Now enjoy your new Crystal Eyes 3rd Brake Light.